6.5 Inch Brushed Nickel Kitchen Cabinet Hardware Pull

6.5 Inch Brushed Nickel Kitchen Cabinet Hardware Pull Review

6.5 Inch Brushed Nickel Kitchen Cabinet Hardware Pull Feature

• Brushed Nickel bar handle.
• 6.5 inches length aprrox. 168mm
• 5 inch hole centers
• Solid Steel 1/2 Inch Diameter
• 7/8 Inch Cabinet Face to bottom of handle.

Diameter 1/2 inch. Length 6.5 inches. Hole centers 5 inches. Material steel 7/8 inch height from the cabinet face to handle bottom.

Stanley Hardware 3-1/2-by-3-1/2-Inch Spring Hinge Standard Weight Square Corner, Satin Brass #530743700

Stanley Hardware 3-1/2-by-3-1/2-Inch Spring Hinge Standard Weight Square Corner, Satin Brass #530743700 Review

Stanley Hardware 3-1/2-by-3-1/2-Inch Spring Hinge Standard Weight Square Corner, Satin Brass #530743700 Feature

• Standard weight spring hinge automatically closes the door; ideal for use in corridors, entrances and stairways
• Anti-friction bearings take vertical and lateral loads; patented ratchet design for quick fine-tuning of tension
• Can be installed right- or left-handed on doors measuring up to 4-by-8 feet and weighing up to 180 pounds
• Comes complete with a wrench, adjusting pins, and directions
• Measures 3-1/2 by 3-1/2 inches; square corners; bright satin brass finish

The Stanley Hardware 3-1/2-by-3-1/2-inch standard weight spring hinge automatically closes the door and is ideal for use in corridors, entrances and stairways. An alternative to overhead mounted door closers, this spring hinge looks and performs like a premium concealed bearing hinge and is well suited for residential work. Anti-friction bearings take vertical and lateral loads; the patented ratchet design allows for quick fine-tuning of tension with just an Allen hex key. The hinge can be installed right- or left-handed, can be used with doors measuring up to four by eight feet and weighing up to 180 pounds, and comes complete with a wrench, adjusting pins, and directions. Backed by a lifetime warranty against defects in material and workmanship, this product features square corners, measures 3-1/2-by-3-1/2 inches, and comes in a bright satin brass finish.

Hinge Mate HM-1100W Door Hinge Template II

Hinge Mate HM-1100W Door Hinge Template II Review

Hinge Mate HM-1100W Door Hinge Template II Feature

• Door hinge template; 5-inch maximum hinge capacity; 1-3/4-inch maximum jam thickness
• Accurately set hinges in minutes; doors, strike plates, boxes, or edge routing projects
• Made of durable, lightweight anodized aluminum
• Includes 1/2-inch diameter bit with top bearing
• 4.65-pounds; handy storage case included

The router is every carpenter’s tool of choice for cutting hinge mortises. However, to cut mortises precisely and quickly, you must use a template, especially if you’re hanging several doors. The Hinge Mate HM-1100W Door Hinge Template II combines fast, easy set-up with the versatility and capacity to handle nearly all hinge-installation jobs.

The rugged, yet lightweight, aluminum template comes with everything needed to rout mortises, except the router. And unlike most other mortise-routing templates that must be nailed or screwed in place, the Hinge Mate clamps directly to the door or doorjamb. The template will cut mortises ranging from 1-inch to 5 inches long, and it has a maximum clamping capacity of 1-3/4 inch thick. Be aware that the template won’t clamp to jambs that are already installed.The Hinge Mate Door Hinge Template II can also be used to rout hinge mortises in wooden boxes and chests, and to cut mortises for strike plates. It comes with a hinge-setting gauge, guide pins, 1/2-inch diameter carbide-tipped router bit, and storage case. Note that you’ll need a 5/8-inch diameter. bit to rout matching mortises for hinges with rounded corners. --Joseph Truini

What’s in the Box: Hinge Mate Door Hinge Template, 1/2-inch diameter ball-bearing-piloted router bit, storage case, instructional booklet Lets you accurately set hinges in minutes. Use it for doors, strike plates, boxes, or other edge routing projects. For hinges 1" - 5" long on stock up to 1-3/4" thick. Precision made of extruded aluminum with built-in clamps, hinge setting gauge, plus scales and guide pins for door and jamb mortising. Includes special 1/2" dia. carbide bit with top bearing, and storage case.

Amerock BP7565-G10 Self-Closing Partial Wrap 3/8-Inch Inset Hinge, Satin Nickel

Amerock BP7565-G10 Self-Closing Partial Wrap 3/8-Inch Inset Hinge, Satin Nickel Review

Amerock BP7565-G10 Self-Closing Partial Wrap 3/8-Inch Inset Hinge, Satin Nickel Feature

• Satin nickel
• Matches decorative knobs and pulls finishes
• Screws included
• Hinge
• Self-Closing

Finish:Satin Nickel Self-Closing, Partial Wrap Hinge. 3/8' Inset. Available in pairs only. Amerock sets the standard for smooth, self-closing hinge performance Every hinge series is tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality Heavy-duty steel construction Choice of frame wing styles to coordinate with decorative hardware Reliable, self-closing power of dual compression springs (2) #6 T.H. x 5/8'; (3) #6 O.H. x 1/2'

Lee No.210 Dn Electric Door Light Switch Box Only

Lee No.210 Dn Electric Door Light Switch Box Only Review

Lee No.210 Dn Electric Door Light Switch Box Only Feature

• Make your closet light turn on or off when you open or close the door
• Save money by reducing your electric bill and lengthening bulb life
• Works with sliding or hinged doors

Had it up to here with replacing burnt-out light bulbs because you or someone in your household forgot to turn off the closet light? Simplify matters by equipping your closet door with a convenient automatic light switch. Just mount this 1200 Watt spring-

European Cabinet Concealed Self Close Inset Hinge

European Cabinet Concealed Self Close Inset Hinge Review

European Cabinet Concealed Self Close Inset Hinge Feature

• European Cabinet Concealed Self Close Inset Hinge
• For Frameless Cabinets with Full Inset Doors.
• 110 Degree Opening. 35mm Cup Size. Clip On Mounting Plate Included.

Long arm European style cabinet hinge. Made for 3/4" door and side panel. Hinge opens 110 degrees and features full adjustability after installation. Hinge fits into a "cup" drilled into the back side of the cabinet door. The cup diameter is 35mm (1-3/8"). For cabinets with full inset doors and no face frame (frameless cabinet). Hinge is made from steel and is nickel plated. Reveal: a 3mm bore distance (distance between the edge of the door and the edge of the 35mm cup drilled in the back of the door) will produce a reveal of 1mm. The reveal is the gap between the edge of the door and the cabinet side panel. Clip-on mounting plate included. The hinge and the mounting plate attach to each other by snapping together without the use of additional fasteners.

Glass Door Pivot Hinge, Satin Black, Pair

Glass Door Pivot Hinge, Satin Black, Pair Review

Glass Door Pivot Hinge, Satin Black, Pair Feature

• Pair
• Pressure screws will hold 1/4'' thick glass securely in hinge
• Use on inset doors only
• Requires a 9 mm hole for pivot bushing
• Requires Magnetic catch/Magnastrike

Use this hinge to insert glass to create a free swinging glass door. This pivot hinge requires no drilling of the glass and is simple to install. Choose from Polished Chrome, Polished Brass, or Satin Black Finishes. Sold in pairs. Use on inset doors only. Pressure screws will hold 1/4'' thick glass securely in the hinge. Requires a 9 mm hole for pivot bushing. Requires Magnetic catch/Magnastrike .

Salice Excen-Three Hinges, 106 Deg. Opening, 1/2'' Overlay, Pair

Salice Excen-Three Hinges, 106 Deg. Opening, 1/2'' Overlay, Pair Review

Salice Excen-Three Hinges, 106 Deg. Opening, 1/2'' Overlay, Pair Feature

• Simple installation and precise door alignment
• Self-lubricating
• Self-closing
• Cup diameter: 35mm
• Sold in pairs with mounting screws, instructions and installation template

Enjoy simple installation and precise door alignment with these low-profile, one-piece concealed cup hinges by Salice. Three eccentric cams allow you to quickly and easily adjust the doors in every meaningful direction (side-to-side, up-and-down, and in-and-out) for perfect alignment. Twin-screw attachment to the cabinet frame provides superior stability, while zero door protrusion and a low hinge profile allow pull-out shelves to extend without interference. Made of solid steel, Excen-Three hinges feature a beautiful, corrosion-resistant nickel finish for a lifetime of trouble-free operation. They open to 106 degrees and are available for several levels of door overlay.

Technical Details:
Self-lubricating.
Self-closing.
Similar boring pattern as Blum hinges.
Cup diameter: 35mm.
Cup depth: 11mm.
Lifetime warranty.

What's in the Box?
Pair of Salice Excen-Three hinges in your choice of Overlay
Matching mounting screws
Instructions and an installation template

Amerock BP3417-G10 3/8-Inch Inset Face Mount Hinge, Satin Nickel, 2-Pack

Amerock BP3417-G10 3/8-Inch Inset Face Mount Hinge, Satin Nickel, 2-Pack Review

Amerock BP3417-G10 3/8-Inch Inset Face Mount Hinge, Satin Nickel, 2-Pack Feature

• 2 Hinges Included
• Screws and cork pads included
• Matches amerock decorative knob and pull finishes

Finish:Satin Nickel Non Self-Closing, Face Mount, 3/8' Inset High strength steel Numerous style and application options Choice of styles and finishes to coordinate with decorative hardware (2) #5 O.H. x 5/8'; (3) #5 F.H. x 1/2'. Available in pairs only.

Blum 105 Degrees Compact 38N Series 1/2" Overlay Screw-On One Piece Design Cabinet Hinge.

Blum 105 Degrees Compact 38N Series 1/2" Overlay Screw-On One Piece Design Cabinet Hinge. Review

Blum 105 Degrees Compact 38N Series 1/2" Overlay Screw-On One Piece Design Cabinet Hinge. Feature

• 3-Way Adjustable In and Out Cam Adjustment: +/- 1/16" side, +/- 1/8" height, +3/32" - 1/32" depth
• 105 degrees opening angle; Self-closing
• One piece assembly; Wrap around mount
• For 3/4" thick face frames only; 7/16" cup depth; Stamped steel
• Don't forget the cover cap, Search: Blum Cover Cap For Compact 38N Hinge

Screw-on (Screws Included). One piece face frame hinge for 3/8", 1/2", 7/16", 5/8" and 3/4" overlay doors. One screw height adjustment and one screw side to side adjustment. Lifetime Warranty.